Full Automatic Steel Corrugated Silo Roll Forming Machine
Production schedule
Working craft
Manual feeding----roll forming---Output
2
2.1
2.1.1Operation area:20X 5.0 X 8(length X width X height)m
2.1.2The direction of feeding: from left to right
2.1.3Power: 380V, 50Hz, 3 parch
2.1.4Total Power:about 265kw
2.2 Main technical data
2.2.1 Width of material sheet:1145 mm
2.2.2 Thickness of material sheet:3~7mm
2.2.3 Low carbon steel,galvanized sheet,cold steel,etc
2.2.4Working piece length:≤6000 mm
3. Production range
3.1
This roll forming machine can produce the forming part of corrugated steel.
3.2
Product:Corrugated steel
3.
| No. |
Name |
Type |
Quanti. |
Remark |
| 1 |
Roll Forming Machine |
GY300 |
One set |
|
| 2 |
Forming Rollers |
|
Two sets |
Waves height X distance 100X20 one set
Waves height X distance 200X55 one set
|
| 3 |
Collection Table |
|
Two sets |
|
| 4 |
Electric Control System |
|
One set |
|
4.General structure of equipment
Roll Forming Machine
1) Structure
Cast steel+gearbox driven
2)Functions and Structure
After 20 roller stations,the profile is finished.It consists of DC motor,reducer motor,driven gearbox and rollers.Lathee Bed and drive box adopts welded structure and stress treatment; Gear takes 45 steel hard tooth surface.
The roller uses the combinated structure, the speed difference and the forming resistance are small, the steel plate surface will be less wear; and also guaranteed the precision shape of the working piece with no scratch .The material of the roller is the GCr15 forging, after whole quenching then by numerical control processing, degree of hardness can reach HRC58-62; Has the characteristic with high strength, hardness, precision and long service life etc.
Driven type:itakes gearbox driven
Main technical parameters
Forming station: about 20stations
Power of motor: 75X2＝150kw frequency motor
Roller axis:￠280mm
Max feeding width:1145mm
Forming mould: two sets
5.Bending Machine
Main Technical Parameters
Machin size:Length*Width*Height =2000*1200*1900(mm)
Driven motor power:5.5kw( with frequency speed control system)
Lift power:1.5kw(loading capacity 5 ton) it can move through rotary encoder
Double chain driven Sprocket pitch P=25.4
Roller material Gr15 (quenching treatment)
Roller shaft:upper roller 1/bottom roller 2 pcs,it takes 3 rolles bending
Thickness:0.8-1.8mm
Working
Product Tags:
|
|
Full Automatic Profile Sheet Making Machine Images
|
